Drywalls are common features in most homes as they create a smooth and leveled surface for walls and/or ceilings. However, it may develop some problems as it wears out, is exposed to moisture or is accidentally dropped. Thankfully, most of the drywall issues are not very complicated and therefore can be repaired with hand tool and materials.
If one does not have time for such repairs, or is being overwhelmed by it, consider typing “cheap handyman near me” on the search engine. Hiring professionals can save you both time and effort while ensuring quality results on your repairs. If you are located in the United States and need assistance finding reliable help quickly, utilizing an online directory like Handymennearme.com makes connecting with local handymen easy!
In this post, let’s explore some of these issues and provide simple solutions that any homeowner can carry out.
Small dents or holes
One of the most often noted issues related to the presence of drywall is the presence of small holes or dents. These take place usually when you are hanging some pictures or when furniture is constantly scraping against the walls.
Solution: For small holes left when nail has been removed, use a lightweight spackle or joint compound to cover up the holes. Spread the compound on to the wall using an implement such as a putty knife – sheer the compound so that it levels with the wall surface. Wait for it to dry then gently use some fine sand paper to level the surface.
Cracks
Another typical problem is linear defects in the surface or at the corners of rooms, caused by the cracks in joints and seams of sheets of gypsum plasterboard. Such cracks are usually caused by movements that take place in the house such as when it settles to the ground or when the weather changes and makes the house expand or/and contract.
Solution: To repair these cracks begin by shaving them just a little with the edge of a utility knife. This will give you a better key for your repairing materials. Then cover the crack with a mesh tape and apply joint compound with a putty knife. If possible feather out the edges of the compound so that when it is dried and sanded it provides a blend into surrounding area.
Water damage
Another concern among home owners who have installed drywalls in ceilings or walls is the damage caused by water – typically in locations such as the lavatory or the kitchen. Leakage causes discoloration of the walls and if you ignore this condition the chances of mould growth increases.
Solution: The first step is to ensure that the water source that caused damage to the drywalls gets resolved, so you can repair. Saw out this piece of drywall until you reach the hard material that is behind this soft and sagging cover – join this piece by nailing new pieces of drywall screws at the corresponding section.
When all the patches are dry (it takes about 24 hours), wet-sand the patched areas until they are smooth, then apply a coat of primer and paint in the shade of your walls.
Conclusion
With simple supplies such as the spackle compounds and other information from this guide— or help from experienced handyman — you will ensure that your home remains stylish without spending too much money!
